Titanium Plate Cut to Size from Ready Stock | Gr2 Zero Cutting & Same-Day Dispatch

Product Overview

Reviewed and maintained by the Engineering Team, Shaanxi Qianyi Tuoda Technology Co., Ltd.

Titanium Plate Cut to Size from Ready Stock | Gr2 Zero Cutting & Same-Day Dispatch

Meta Description: Titanium Plate cut to size from ready stock. 400 tons Gr2 inventory, shearing/plasma/waterjet cutting, ±0.5mm tolerance, MTC EN 10204 3.1, same-day dispatch. Quote within 24h.

Overview

We are a Baoji-based titanium inventory holder and supplier with 800 tons total titanium stock, including 400 tons of Titanium Plate in various grades, thicknesses, and dimensions. Unlike mills that require full-plate minimum orders, we operate as a stockist with in-house cutting capability. You send a drawing or dimension list; we cut from ready stock and dispatch the same day for confirmed orders. This page explains exactly how our cut-to-size service works, what we hold in inventory, and what you can expect when you order.

What "Cut to Size from Ready Stock" Means

Many overseas buyers need Titanium Plate in specific rectangles, discs, or profiles — not a full 2m×6m plate. We bridge that gap:

• Ready stock: Plates already purchased, inspected, and shelved in our warehouse (not made-to-order from mill)
• Cut to size: You specify final dimensions; we shear, plasma-cut, or waterjet from stock plate
• Zero cutting: We cut exactly what you need — one piece, ten pieces, or a full plate subdivided into multiple parts
• No full-plate forced purchase: If your requirement is 600mm×800mm, you pay for that piece, not a 2000mm×6000mm mother plate

Inventory Snapshot — What We Actually Hold

Our Titanium Plate inventory rotates weekly. Current estimate:

Important: Stock changes daily. We confirm live availability before issuing proforma invoice. If a specific thickness is temporarily low, we advise lead time for replenishment from partner mills.

Cutting Methods & Capabilities

All cutting is performed after order confirmation based on your drawing (PDF/DWG/STEP) or written dimension list. We do not pre-cut and hope someone buys it — every piece is cut to a confirmed order.

How to Order — Step by Step

1. Send enquiry: Email sales@[yourdomain].com with grade + dimensions (or drawing) + quantity + destination
2. Stock check: We confirm whether required size exists in current inventory (within 4 business hours)
3. Quotation: We issue proforma invoice with EXW/FOB price, cutting method, lead time, and shipping estimate
4. Confirmation: You approve drawing/dimensions and arrange payment (T/T 30% advance standard)
5. Cutting & inspection: Plate is cut, deburred, dimensional-checked, MTC cross-verified
6. Dispatch: Packed in wooden crate with moisture barrier; shipped same day if cut before 3 PM China time

Drawing Review — We Read Blueprints

Our team reads both metric and imperial drawings. We accept:

• PDF dimensioned drawings
• DWG / DXF files (for waterjet nesting)
• STEP files (for complex profiles)
• Hand-sketch with clear dimensions (we confirm before cutting)

For each drawing, we verify: grade, thickness, overall dimensions, tolerance requirements, quantity per sheet, and nesting efficiency (how many pieces fit from one mother plate). We propose the most cost-effective cutting layout and confirm with you before processing.

Offcut & Small-Order Policy

We do not force full-plate purchases. Our offcut policy:

• Small offcuts from zero-cutting operations are held and sold at reduced rates
• If your size matches an existing offcut, we quote offcut price (typically 15–30% below full-plate cut price)
• Single-piece orders accepted for standard sizes
• No minimum order value — we serve prototype shops, R&D labs, and maintenance teams, not just bulk buyers

Surface Finish Options

Specify surface requirement on enquiry. If not specified, we supply pickled finish as standard for Gr2 plates.

Export Packaging for Cut Pieces

Cut-to-size pieces require more protection than full plates because edges are exposed:

• Each piece interleaved with protective film or kraft paper
• Edges padded with foam corner guards
• Multiple pieces separated by plywood dividers inside crate
• Outer: fumigated wooden crate with steel banding and moisture-proof lining
• For thin sheets (<2mm): flat steel frame inside crate to prevent bending
• Marking: grade, heat number, dimensions, quantity, PO reference etched or tagged on each piece

Quality Assurance — Every Piece Checked

• Source mill certificates verified (BAOTI, Western Titanium, or equivalent)
• Thickness measured at multiple points per piece
• Flatness verified (≤3mm/m typical)
• Ultrasonic testing (UT) for plates ≥20mm before cutting
• MTC EN 10204 3.1 supplied with every dispatch; heat number traceable to mill heat
• No grade substitution without written customer confirmation
• Third-party inspection (SGS/BV/TUV) arranged at buyer's cost

Standards We Supply Against

Typical Customer Applications

FAQ — Cut-to-Size Service

Q1: What is the smallest piece you can cut from stock?
A: There is no absolute minimum. We have cut 50mm×50mm test coupons from offcuts. For very small pieces, handling and packing cost may exceed material cost — we quote accordingly.

Q2: Can you cut a full plate into multiple different-sized parts?
A: Yes. Send a cutting list (e.g., "from one 6×2m plate: 4 pcs 800×600mm + 2 pcs 1200×400mm"). We nest for best yield and quote total cut pieces from one mother plate.

Q3: What tolerance can you hold?
A: Shearing ±0.5mm, waterjet ±0.2mm, plasma ±1.0mm. Tighter tolerances available — specify on drawing.

Q4: Do you charge for cutting?
A: Cutting is included in the per-piece or per-kg price we quote. There is no separate "cutting fee" line item. Complex waterjet profiles may carry a small programming/nesting surcharge, disclosed upfront.

Q5: Can I supply my own plate for you to cut?
A: We cut from our own stock only. This ensures traceability (MTC links to material). If you need toll cutting, discuss with us — we may accommodate on a case-by-case basis with material verification.

Q6: How do you prevent mix-up between grades during cutting?
A: Each stock plate is tagged with heat number before entering cutting area. Cut pieces retain heat-number tag. We do a pre-cut and post-cut grade verification against MTC. No mixing.

Q7: What if my cut piece has a burr or edge defect?
A: All cut edges are deburred as standard. If you find a defect on arrival, photograph it and send to us within 7 days. We re-cut and reship at our cost.

Q8: Can you drill holes or countersink as part of cutting?
A: Yes. Drilling, countersinking, and light machining are available per drawing. For heavy machining, we coordinate with partner workshops in Baoji Titanium Valley.

Q9: What is your scrap/offcut policy?
A: Scrap from cutting stays with us unless you request return (some customers want offcuts for testing). Offcuts large enough for resale are held in offcut inventory and offered at reduced rates.

Q10: How fast is "same-day dispatch"?
A: Orders confirmed (drawing approved + payment received) before 3 PM China time dispatch the same working day. Shearing jobs typically same-day; waterjet jobs may require 1–2 extra days depending on queue.

Request a Quote

To receive a quotation for cut-to-size titanium plate from ready stock, please provide:

1. Grade: e.g., Gr2, TA2, TC4, Gr5
2. Dimensions: thickness × width × length (or attach drawing file)
3. Quantity: pieces or total kg
4. Standard: ASTM B265 / GB / EN / AMS
5. Surface finish: pickled / polished / as-rolled
6. Cutting method preference: if any (shear / waterjet / plasma)
7. Delivery destination: for freight estimation
8. Required documents: MTC only / third-party inspection / COO

Email: sales@[yourdomain].com
Response: stock confirmation + quotation within 24 working hours.

About Us: We are a titanium inventory holder and supplier based in Baoji, China — the "Titanium Valley." With 800 tons total stock across plate, tube, bar, wire, fittings, flange, fasteners, nickel products, and non-standard equipment, we serve overseas procurement clients with cut-to-size service from ready stock, drawing review, standard compliance, and export-ready delivery. Same-day dispatch available for confirmed in-stock orders.