What is titanium plate?2026 All-brand selection guide for grades/specifications/prices/applications
Published by Engineering Team, Shaanxi Qianyi Tuoda Technology Co., Ltd on 2026-07-29
Shaanxi Qianyi Tuoda Technology relies on Baoji Titanium Industry Cluster Resources Direct SupplyTitanium Plate, has 12 years of titanium production and processing experience, can provide TA1, TA2, TA9, TA10, TC4 and other full gradesTitanium Platecash commodity, Product thickness range 0.5-100mm, Support non-calibration ruler machining, Export packaging available, Logistics can be distributed nationwide, can be matched withtitanium pipepieceSupporting supply.{1}
I.Titanium PlateWhat's that?speak it out in one sentence
Titanium Platetitanium or titanium alloy as raw material, after hot rolling, Sheet nonferrous metal materials made by cold rolling, etc., Material density is only 4.5g/cm³, About 56% of steel, The tensile strength can reach 895 - 1100 MPa.With four characteristics of lightweight, high strength, corrosion resistance and biocompatibility,
Titanium PlateWidely used in aviation, chemical, marine, medical and construction industries.
titanium plateBasic parameters: density 4.5g/cm³, melting point 1604℃;Conventional supply thickness 0.5-100mm, special needs can be customized to 500mm;Regular width 1000-3000mm, regular length 2000-6000mm, support on-demand cutting.
Second,titanium plateThe three categories (buyer will understand)
It can be divided into pure according to compositiontitanium plateTitanium alloy plate, TA3 is commercially pure titanium., Plastic good, good processing performance, Adapting chemicals, seawater, Medical sceneTitanium alloy plates such as TC4 have higher strength, high temperature resistant, More for aviation, war industry, in the medical field.
According to the processing technology is divided into hot rollingtitanium plateand cold rollingtitanium plate: Hot rolled titanium plate thickness ≥4mm, excellent mechanical properties, surface finish in general;Cold-rolled titanium sheet thickness 0.5- 4mm, high surface accuracy, Ra≤0.8μm, strict size tolerance control.
According to the surface treatment is divided into acid wash, polishing surface, sandblasting surface.Pickled surface, also known as industrial surface, cost-effective, mostly used in chemical and offshore projects;Polished mirror titanium plate is mostly used in medicine, semiconductor, food clean conditions;Sandblasting titanium plate is often used for architectural decoration, sculpture production, can be matchedTitanium forgingPurchase together.
Third, titanium plate mainstream brand selection reference
Shaanxi Qianyi Tuoda has more than 3000 tons of titanium stock, covering many types of titanium plate brands at home and abroad.TA1 corresponds to international Gr1, titanium purity ≥99.5%, suitable for weak corrosion, seawater, biomedical conditions;TA2 corresponds to Gr2, titanium purity ≥99.2%, is a common mainstream brand in the chemical field;TA3 corresponds to Gr3, titanium purity ≥99.0%, slightly higher strength, suitable for chemical machinery equipment;TA4 corresponds to Gr4, which is a high-strength pure titanium material.TA9 corresponds to Gr7, titanium-palladium alloy, suitable for strong acid, strong reducing medium;TA10 corresponds to Gr12, Ti-0.3Mo-0.8Ni material, suitable for dilute sulfuric acid, dilute hydrochloric acid, wet chlorine environment;TC4 corresponds to Gr5, Ti-6Al-4V, often used in aerospace and medical high-intensity scenarios;TC4 ELI corresponds to Gr23 ultra-low gap titanium alloy, which is mostly used for medical implants and deep-sea equipment.And then there's TC6., TA15 grade, Respectively adapted aeroengine, Scenes such as high temperature protection components.
Model selection and procurement formula: hydrochloric acid and dilute sulfuric acid working conditions are preferred to TA10;TA9 is selected for strong acid and pitting risk;TA2 or TA10 is selected for seawater desalination and offshore platform;TC4 ELI is adopted for medical implant and body-contacting parts;TC4, TC11 and TA15 are selected as high temperature structural parts for aviation;TA2 is selected for normal chemical normal temperature and pressure conditions, and the economy is better.
Four, titanium plate five production processes and quality inspection points
Titanium plate production includes melting, forging and rolling, heat treatment, surface treatment, quality control five links.the smelt adopts a vacuum consumable arc furnace or plasma arc smelt, High quality products will adopt secondary vacuum consumable process, Ensure uniform composition, Impurities are lower.the roll process comprise hot rolling at 800-950 DEG C to produce thick plates, and cold rolled sheet at room temperature., The rolling process is interspersed with annealing to eliminate work hardening.Heat treatment includes solution treatment and aging treatment to optimize material stress, strength and toughness.Surface treatment can be anodized, shot peening, pickling, mirror polishing to meet different corrosion and appearance requirements.
Procurement inspection focuses on five indicators, Material spectral composition verification, Component deviation controlled within ±0.05%Ultrasonic flaw detection, internal defect inspection;Tensile, impact, hardness mechanical properties test;Three-coordinate size detection, thickness tolerance ±0.02mm;Flatness detection, flatness 2mm or less per meter.Each batch of titanium plate can be accompanied by SGS, Pony test report, support third party re-inspection, can also be matchedTitanium plate machining partsCustom finishing.
Five, titanium plate six performance advantages
1. High strength and light weight, Density is only 4.5g/cm³, TC4 Tensile strength 895-1100MPa, specific strength superior to steel, Aeronautical components can achieve significant weight reduction.
2. good thermal stability, Melting point 1604℃, Stable strength can be maintained at 600℃, Suitable for high temperature equipment.
3. low thermal expansion coefficient, About 8.6×10/K, About half steel., Suitable for precision equipment with large temperature fluctuation.
4. Outstanding corrosion resistance, A dense titanium dioxide passivation film can be formed on the surface, in seawater, The corrosion resistance performance in acid and alkali environment is better than 316L stainless steel.
5. Biocompatibility up to standard, ISO 10993-5 compliant, Non-toxic and non-allergenic, Suitable for Orthopaedics, Dental implant products.
6. High processing threshold, Narrow hot rolling temperature window, Cold rolling equipment requirements are high, It is also the main reason why the purchase cost of titanium plate is higher than that of stainless steel.
Six, titanium plate six application areas
Aerospace is the core application scenario of high-end titanium plate, TC4 for engines, rocket structural component, fuselage skin, TC 11 for high temperature protection partsChemical and marine engineering is the largest field of titanium plate consumption, TA2 for reactors, heat exchanger, sea water desalting equipment, TA10 for dilute acid tanks, wet chlorine pipeline, TA9 for strong acid electrolyzers, Service life is much better than stainless steelThe construction field is mostly used for high-end curtain walls and coastal building roofs to resist chloride ion corrosion;Medical Industry TC4 ELI for Orthopedic Implants, TA1/TA2 Making Pharmaceuticals, medical device houseTA2 pure titanium plate is used for cooling system and spent fuel container in nuclear power field, which is non-magnetic and anti-radiation corrosion;Hydrogen, semiconductor and electrolysis industries use high-purity titanium plates to make hydrogen storage components, sputtering targets and electrolytic cathode mother plates.
Seven, titanium plate implementation standards and 2026 procurement market
Titanium plate procurement acceptance can refer to GB/T 3621-2007 titanium and titanium alloy plate, YS/T 574-2010 titanium plate for electrolytic titanium;International standards include ASTM B265, ASME SB-265, AMS 4900 series, and medical ISO 5832 series.
The market price of titanium plate fluctuates in 2026. The reference price of TA2 5mm×1000mm is 75-100 yuan per kilogram, and the spot reserve is sufficient.TA2 10mm×1500mm reference 70-90 yuan per kg;TA1 5mm×1000mm reference 100-120 yuan per kg;TA10 5mm×1000mm reference 130-160 yuan per kg;TC4 5mm×1000mm reference 380-600 yuan per kg;TA9 and TC4 ELI are mostly ordered products with high prices.Titanium prices change daily with market conditions, accurate quotations can be contacted sales to obtain the same day quotation.
VIII. Advantages of selecting Shaanxi 100 billion Tuoda
The enterprise is located in Baoji titanium industry cluster core origin, first-hand direct supply of goods, eliminating the middleman link;12 years of titanium processing experience, serving more than 500 chemical, aviation, marine, pharmaceutical enterprises;More than 3000 tons in stock, regular brands can be shipped on the same day, urgent orders 24 hours out of stock;One-stop procurement of titanium materials for all brands, complete testing data, support for third-party re-inspection;0.5-100mm thickness non-standard customization, delivery cycle 7-15 days, national logistics distribution.
disclaimer, Text Parameters, market, Application cases only as technology selection, Procurement Reference, Does not constitute a technical commitment and a fixed commercial offer.Different working conditions and processing requirements will affect the use of materials, and the price of titanium will fluctuate with the raw material market.Shaanxi Qianyi Tuoda Technology Co., Ltd. reserves the right of final interpretation of this article. If you need advice, you can call to negotiate.