Gr1 Pure Titanium Rod Low‑Iron Contamination For Electrolysis Electroplating Anode
Published by Engineering Team, Shaanxi Qianyi Tuoda Technology Co., Ltd on 2026-10-25
1. Product Identity
Produced in Shaanxi Baoji China, Gr1 pure titanium rod is specially optimized for electrolysis and electroplating anode application. Different from general‑purpose industrial titanium bar, this rod implements strict whole‑process anti‑iron‑contamination control during forging and rolling. Gr1 features lower alloy content and stable electrical conductivity. Mainly used as electroplating anode substrate, electrolytic cell conductive bus bar, chemical anti‑corrosion conductive shaft and ion‑exchange equipment components. We supply rolled rough bar, peeled bar and precision machined blanks, support cut‑to‑length service.
2. Core Technical Parameters
-
Material Grade: Grade1 Commercially Pure Titanium
-
Manufacturing Technique: Hot forging, hot rolling, peeling, pickling
-
Quality Feature: Strict low‑iron contamination control for electrolysis service
-
Certificates: ISO 9001:2015, EN10204 3.1
-
Payment Terms: T/T, Trade Assurance, L/C
-
Packing: Careful inspection before shipment, export wooden case package
-
Shipping: By air, ocean, railway
-
Application: Electroplating anode, electrolysis cell conductive parts, chemical corrosion‑resistant conductive shaft
3. Chemical Composition (wt%, ASTM Standard)
|
Grade
|
Ti
|
Fe
|
O
|
C
|
N
|
H
|
Alloy Elements
|
|
Gr1
|
Balance
|
≤0.20
|
≤0.18
|
≤0.08
|
≤0.03
|
≤0.015
|
—
|
4. Mechanical & Corrosion Performance
-
Tensile Strength: ≥240 MPa
-
Yield Strength: ≥170 MPa
-
Elongation: ≥24%
-
Electrical Performance: Stable conductivity, suitable for long‑time current‑carrying working condition in electrolytic tank.
-
Corrosion Resistance: Excellent resistance against chloride electrolyte solution, effectively resist anode oxidation corrosion under energized state.
-
Processing Feature: Good ductility for bending, drilling, thread processing; whole‑process anti‑iron pollution prevents iron impurity from contaminating electrolyte and destroying plating quality.
5. Full Size Range
-
Diameter: Custom range from small anode rod to large‑diameter conductive shaft blank.
-
Length: Random rolled length or fixed‑length cutting per customer technical requirement.
-
Product status: Hot‑rolled pickled bar, peeled bar removing surface contaminated layer, finished machined anode blank.
-
Custom options: Thread machining, hole opening, special tolerance for conductive connection end.
6. Surface Treatment Options
-
Pickling surface: Remove hot‑working oxide scale, for subsequent full machining of anode parts.
-
Peeled surface: Completely strip surface iron‑contaminated layer, critical for electroplating‑grade anode raw material.
-
Ultrasonic cleaning: Remove processing residue before delivery for high‑purity electrolysis system.
7. Material Comparison: Gr1 Titanium Rod vs Gr2 Titanium Rod for Anode Service
|
Item
|
Gr1 Titanium Rod
|
Gr2 Titanium Rod
|
|
Oxygen & iron limit
|
Lower impurity content, stricter control
|
Slightly higher allowable impurity index
|
|
Electrolysis‑grade suitability
|
Preferred for high‑requirement electroplating anode
|
Acceptable for general low‑requirement electrolysis
|
|
Mechanical strength
|
Medium, better ductility
|
Higher tensile strength
|
|
Typical application
|
High‑quality electroplating, precious‑metal electrolysis cell
|
General chemical anti‑corrosion structural parts
|
Gr1 titanium rod is recommended when electrolyte purity and plating layer quality are high priority; avoid surface iron contamination which may cause plating failure.
8. Strict Quality Control & Test Items
-
Raw ingot chemical analysis, strictly control Fe, O interstitial element content.
-
Isolated production flow, prevent cross‑contamination from carbon‑steel tooling during hot working.
-
Diameter, straightness and length dimension inspection for each bar batch.
-
Ultrasonic inspection for internal inclusion and crack defects.
-
Surface inspection: Focus check for iron pickup, scratch and burr.
-
Issued documents: EN10204 3.1 MTC, chemical composition report, batch traceability record.
9. Export Packaging & Shipment
-
Inner packing: Anti‑rust plastic film and independent foam spacer, avoid metal‑to‑metal friction introducing iron contamination.
-
Outer packing: Fumigated export wooden case, secure binding to prevent bar bending in transit.
-
Marking: Laser mark grade, diameter, heat number on each bar end.
-
Trade terms: FOB, CIF, DDP; air freight for small‑batch anode blanks, sea freight for bulk quantity.
10. Inquiry & Custom Service (Send Your Drawing Now)
We supply low‑iron‑controlled Gr1 pure titanium rod specially for electroplating and electrolysis anode, support peeling processing and custom‑length cutting.
Please provide following information for accurate quotation:1) Diameter and effective length;2) Surface requirement (peeled / pickled);3) Working condition: electrolyte medium, current‑carrying requirement;4) Order quantity and delivery schedule.
Website: www.sxqytd.com
Contact us for electrolysis‑grade material technical suggestion and formal quotation.